background image

1

 Important Safety Instructions

 
Congratulations on purchasing the Zodiac Robotic Cleaner. Please read through the 
entire manual before installing your new robotic pool cleaner. Your cleaner must be 

installed and operated as specified.

 

 

WARNING

Failure to comply with the following warnings can increase risk of fire or 
electrocution which can result in property damage and serious injury, including 
loss of life.
PREVENT ELECTRICAL SHOCK

To reduce risk of electrical shock:

•  The cleaner is to be installed in accordance with the relevant requirements of the Aus-

tralian wiring rules AS/NZS 3000. Also refer to the installation instructions relating to the 
swimming pool equipment for which the cleaner will be an integral part. The cleaner is to 
be supplied through a Residual Current Device (RCD) with a rated residual operating cur-
rent of 30mA.

•  Do not enter pool while the robotic cleaner is in water.

•  Do not bury cord. Locate cord so as to prevent it from being damaged by lawn mowers, 

hedge trimmers and other equipment.

•  To reduce the risk of electrical shock, do not use the robotic cleaner or control unit if the 

cord is worn or damaged. Contact Zodiac Customer Care Service 1300 763 021  immedi-
ately for proper servicing and replacement of the damaged cord.

•  Double insulation—For continued protection against possible electric shock, use only 

identical replacement parts when servicing. Do not attempt repair of the robotic cleaner, 

control unit, power cord, or floating cable.

•  Use only the power supply provided with the product.

•  NEVER OPEN CONTROL UNIT.

•  DO NOT USE AN EXTENSION CORD TO CONNECT THE UNIT TO ELECTRIC SUP-

PLY; PROVIDE A PROPERLY LOCATED APPROVED ELECTRICAL OUTLET. THE 
CONTROL UNIT SHOULD BE PLACED NEAR THE APPROVED RECEPTACLE BOX.

PREVENT CHILD INJURY AND DROWNING

•  To reduce the risk of injury, do not permit children or persons with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge to operate this 
product.

•  Do not let anyone, especially small children, sit, step, lean, or climb on any equipment 

installed as part of your pool’s operational system. 

SAVE THESE INSTRUCTIONS

Page

 4 

  

 

Zodiac

®

 VX65iQ Robotic Pool Cleaner   

|

   Owner's Manual

Содержание VX65 iQ Vortex-Pro





































Отзывы: