Store the Cleaner When Not in Use
The cleaner must be cleaned regularly using slightly soapy clean water. Do not use
solvents such as trichlorethylene or its equivalent. Rinse the cleaner generously using clean
water. Do not let your cleaner dry in direct sunlight near the pool. The cleaner should be
stored on its caddy so that it dries quickly.
1.
Disconnect cleaner from the power source.
2.
Starting at the cleaner head, remove all coils and tangles from the cable (Figure 26).
Lay the cable in the sun to loosen any tangling memory.
3.
Place the rear wheels on the caddy and position the cleaner vertically on the caddy
base.
4.
Disconnect the cable from the control unit. Replace the protective cap on the control
unit.
Figure 26. Untangle the Floating cable
5.
Loosely coil the floaing cable starting at the cleaner and moving toward the
connection point at control unit. Store the cable by wrapping it around the hook
located on the front of the caddy.
Replacing Wear Parts
Replacing Brushes
The cleaner is fitted with PVC brushes with a ''wear'' indicator. (Figure 27).
raised groove becomes
partially flattened,
indicating excessive
wear
Figure 27. Worn Brush Indicator
Page
27
Zodiac
®
VX65iQ Robotic Pool Cleaner
|
Owner's Manual
