Zodiac PF 6M-8M-11M-13M-15M, Руководство по установке

Страница: 6 / 24

5
1.4.4 Hydraulic connections
The connection shall be by Ø 50 PVC pressure pipe, from a by-pass

, to the swimming pool filter
circuit, after the filter

and before the water treatment

:
PF
Hydraulic circuit pressure
Fittings
= inlet
= outlet
Average water
flow-rate
head
loss
test operating
bar bar m³/h mCE
6M
3 1.5
half union Ø50
fitting to stick (see
parts  and 
§1.1.2)
3 1.3
8M 4 1.4
11M 5 1.5
13M
6 1.5
15M 6.5 1.1
Condensation drainage:
Caution: your appliance can drain several litres of water per day, and you are strongly
advised to connect the drainage to the sewer.

connect a Ø18 interior pipe (not supplied), to the grooved end piece mounted on the
base of the appliance,

outlet: to the back or on the side :
The water treatment system (chemical or electro-physical disinfection) must be installed
downstream from the heat pump (see installation below), and must be compatible with
it (check with the manufacturer).
V1-V2-V3: by-pass valves
V5-V4: setting valves (optional)
*minimum distance

electrical protection boxes



