Zodiac iAquaLink Z400iQ, Инструкция по установке и эксплуатации

Страница: 16 / 33

14
2.4.4 Activating/deactivating “cold" mode
Activation of «Cold» mode allows the machine’s cycle to be automatically reversed to cool the pool water when it
exceeds the setpoint temperature by more than 2°C.
• Press and hold
• Press or to display :
• Press and release , the symbol will light up.
• The home screen automatically reappears after 60 seconds of inactivity on the keypad or by pressing and releasing .
To deactivate the “cold/cooling” mode, redo the manipulation, the symbol will go out.
«Cold» mode does not allow cooling to be activated manually.
For immediate activation, activate «Cold» mode then return to the main screen and lower the setpoint
temperature to at least 2 degrees below the measured water temperature.
2.5 I Connection to the iAquaLink™ app
The Z400iQ heat pump may be controlled by remote, from a smartphone or tablet, via the iAquaLink™ app available for
iOS and Android systems.
Before you install the app, you must:
• Use a smartphone or tablet connected to Wi-Fi.
• Use a Wi-Fi network with a reasonably powerful signal when connecting to the heat pump.
• Have your home Wi-Fi network password at the ready.
❶
. Download the iAquaLink™ app from the App Store (iOS) or Google Play Store (Android) then create an iAquaLink™
account (if the app is already installed, move onto the next step).
❷. Open the app then add the heat pump to the list of appliances, following the steps described on the smartphone
or tablet.
• For the first step (pairing), stay near the appliance.
EN