Zodiac EI Скачать руководство пользователя страница 25

Страница: 25 / 115

4.2 Language selection

The default language for your Ei is French. However the appliance is capable of displaying most
messages in the following languages: French, English, Spanish, Italian, German, Dutch and Afrikaner.

To select your language:

1. Switch on the Ei.

2. Wait for the completion of the initial boot sequence on the LCD screen (About 5 seconds).

3. Press and maintain pressed down the

key.

After about 5 seconds the current language will be displayed on the screen.

4. Maintain the

key pressed down until the desired language is displayed on the LCD screen.

5. Release the

key when the desired language is displayed. It will now be the language used to

display messages on the LCD.

4.3 Setting the clock (clock)

IMPORTANT REMARK:

Your Ei Zodiac chlorinator is equipped with an internal memory. During

the ﬁ rst Ei electrical connection (Or upon re-initializing) it is important to leave the power on for at
least 24 hours uninterrupted (permanent power supply or forced operation). This will ensure that the
internal accumulator will be sufﬁ ciently charged to store in memory all the operating parameters.

1. Turn power on.

2. Wait until the successful completion of the initialization sequence on the LCD screen (About 5 seconds).

3. Press down and maintain down the

key.

4. While maintaining the

key pressed, press the

key, in order to set the hours, until you reach

the desired hours value. (The

key can be maintained pressed to accelerate the incrementation).

5. While maintaining the

key pressed, press down the

key, in order to set the minutes,

until you reach the adjustment wanted. (The

key can be maintained pressed to accelerate the

incrementation).

6. Release the

key - the correct time has now been set on the clock.

NOTE: The clock uses a 24 hours display format.

Resetting the appliance:

1. When on the default LCD display press the

key.

2. After a few seconds the Ei device restarts and the clock is reset (‘00:00’).

3. Set the clock time using the procedure described above (

Setting the time

WARNING:

The reinitialisation of the appliance causes the loss of all previous settings (clock,

programmer…)!

4.4 Setting the timer

The Ei chlorinator is equipped with 2 timers that can be programmed so as to release chlorine during
time periods that are different from the ﬁ ltration time, and this, up to twice per day.

Note that the timer periods must be included within the ﬁ ltration periods (no chlorine will be released
when the ﬁ ltration is not running).

IMPORTANT

: The use of the programmer is MANDATORY if the Ei chlorinator is connected to a

permanent power supply.

Setting the timer:

1. When on the default LCD display press the

key to go to ‘TIMER 1’ setting. An automatic message

will appear brieﬂ y, then the following will be displayed: ‘TIMER 1 ON - - : - -’.

2. Press the

key to set the start-up hour (The

key can be held down to accelerate

incrementation).

3. Press the

key to set the start-up minutes (The

key can be held down to accelerate

incrementation).

4. Once the desired ‘ON’ time is set, press the

key in order to move on to the ‘OFF’ time setting:

‘TIMER 1 OFF - -: - -’ will be displayed.

5. Repeat steps 2 and 3 to set the stop time.

6. If you need to set a different time period, press the

key again in order to switch to ‘TIMER 2’ and

repeat steps 1 to 5 above (Once for the onset time and another time to set the stop time). If you do
not need to program another time setting, press the

key to return to the LCD default display.

NOTE:

once the programming of a time setting has been

made, a small ‘T’ icon will be displayed in the upper right
corner of your LCD screen.

NOTE:

When an ‘ON’ start time is deﬁ ned a default stop time is proposed. To deﬁ ne the stop time of

your choice just press the

and

keys to set the time.

To clear the timers:

1. When on the default LCD display press the

key. Wait until the ‘PRESS OUTPUT TO CLEAR