Zodiac Edenpac 4D, Инструкция по установке и эксплуатации

Страница: 2 / 28

IMPORTANT
These installation instructions are an integral part of the product and must be given to the installer
and kept by the user.
The warnings and indications contained in the present handbook must be carefully read and
understood as they provide important information relative to handling and operating safety. This
handbook must therefore always be kept available for later consultation.
Installation must be carried out in compliance with valid regulations and the manufacturer’s
instructions by a qualified professional.
The term «qualified professional» refers to a person possessing the technical knowledge associated
with P.S.A. components and heating installations.
An installation error could result in physical injury to persons or animals as well as mechanical
damage for which the manufacturer may under no circumstances be held responsible.
After having unpacked the heat pump, the content should be checked for possible damage.
Before connecting the heat pump, ensure that the data provided by P.S.A. is compatible with the
true installation conditions and does not exceed the maximum authorised limits for the product in
question.
Before beginning any installation, handling or repair work on the heat pump, always isolate the
electrical power supply to the unit.
In the case of a fault and/or operating error on the heat pump, the electrical power supply must be
isolated and no attempt should be made to repair the fault.
Repair work may only be carried out by an authorised technical assistance service using original
spare parts only. Non-respect of the aforementioned clauses may have a negative influence on
the operating safety of the heat pump.
To guarantee the efficiency and correct operation of the heat pump, it is important to ensure it is
regularly maintained in compliance with the instructions provided by P.S.A.
In the case where a heat pump is sold or transferred to another user, always ensure that all technical
documentation is sent with the equipment to be used by the new user or installer.
This heat pump may only be used for the purpose for which it was designed: to heat a swimming
pool; all other uses must be considered inappropriate, incorrect or even dangerous.
All contractual or extra-contractual responsibilities of P.S.A. will be considered nil and void for any
damage caused by installation or operating errors, or due to non-respect of the instructions
provided by P.S.A. or valid installation standards for the equipment object of the present document.