DEUT
SCH
Allgemeine Installations- und Wartungsanleitung
- PUMPE MIT VARIABLER DREHZAHL
74
HINWEIS
Mehr als eine (1) Minute Inaktivität bestätigt die Auswahl automatisch. Wenn EIN/AUS
gedrückt wird, bevor eine Zeit eingegeben wurde, gehen alle Änderungen verloren.
• Timer
HINWEIS
Die höchste Drehzahl hat Priorität zwischen den Timern.
1.
MODE
SET
Drücken, um Einstellungsmenü zu öffnen.
2.
MODE
SET
oder
MODE
SET
drücken, um sich durch sechs (6) Timer (P1 - P6) zu bewegen.
3.
MODE
SET
drücken für ausgewählten Timer, um Auswahl zu ändern.
4. Bei blinkendem
MODE
SET
,
MODE
SET
oder
MODE
SET
drücken, um Drehzahlauswahl zu ändern. Anfangsdrehzahl ist
Niedrig, sofern keine vorherige Drehzahl gespeichert wurde.
5.
MODE
SET
drücken, um Drehzahl einzugeben.
6. Bei blinkendem T-Start,
MODE
SET
oder
MODE
SET
drücken, um Startzeit einzugeben.
7.
MODE
SET
drücken, Startzeit einzugeben.
8. Bei blinkendem T-Stopp,
MODE
SET
oder
MODE
SET
drücken, um Stoppzeit einzugeben.
9.
MODE
SET
drücken, um Stoppzeit einzugeben.
10. “En” (Enabled/Aktiviert) erscheint standardmäßig auf dem Display.
MODE
SET
drücken, bis „Dis” auf
dem Display erscheint, um zu deaktivieren und
MODE
SET
um zu bestätigen. Der Text blinkt um
anzuzeigen, dass er geändert werden kann.
11.
MODE
SET
Drücken, um zum Hauptmenü zurückzukehren
• Drehzahl Sollwerte
1.
MODE
SET
drücken, um Einstellungsmenü zu öffnen.
2.
MODE
SET
oder
MODE
SET
drücken, bis „Spd1” (NIEDRIGE Drehzahl) erscheint.
3. Bei blinkendem
MODE
SET
,
MODE
SET
drücken für ausgewählte Drehzahl, um die Auswahl zu ändern.
4.
MODE
SET
oder
MODE
SET
drücken, um Drehzahl in ein (1) %-Schritten zu ändern. Bereich ist zwischen 40 - 105% .
HINWEIS
Durch Herunterdrücken einer der beiden Tasten wird die Drehzahl schneller geändert.
5.
MODE
SET
drücken, um Drehzahl einzugeben.
HINWEIS
Mehr als eine (1) Minute Inaktivität bestätigt die Auswahl automatisch. Wenn EIN/AUS
gedrückt wird, bevor eine Zeit eingegeben wurde, gehen alle Änderungen verloren.
1.
MODE
SET
drücken, um Einstellungsmenü zu öffnen.
• Ansaugung
1.
MODE
SET
drücken, um Einstellungsmenü zu öffnen.
2.
MODE
SET
oder
MODE
SET
drücken, bis „SPri” (NIEDRIGE Drehzahl) erscheint.
3. Bei blinkenden Ziffern
MODE
SET
drücken, um Ansaugdrehzahl einzustellen.
4.
MODE
SET
oder
MODE
SET
drücken, um Drehzahl in ein (1) %-Schritten zu ändern. Bereich ist zwischen 40 - 105% .
HINWEIS
Durch Herunterdrücken einer der beiden Tasten wird die Drehzahl schneller geändert.
5.
MODE
SET
drücken, um Drehzahl einzugeben.