NEDERL
ANDS
Handleiding voor installatie en algemeen onderhoud
- VARIABELE SNELHEIDSPOMP
112
OPMERKING
Bij meer dan één (1) minuut inactiviteit wordt de selectie automatisch bevestigd. Als er op
AAN/UIT wordt gedrukt voordat er een tijd is ingevoerd, gaan alle wijzigingen verloren.
• Timer
OPMERKING
De hoogste snelheid heeft voorrang tussen de timers.
1. Druk op
MODE
SET
om het instellingenmenu binnen te gaan.
2. Druk op
MODE
SET
of
MODE
SET
om de zes (6) timers (P1 - P6) te doorlopen.
3. Druk op
MODE
SET
voor de geselecteerde timer om de selectie te wijzigen.
4. Druk, terwijl
MODE
SET
knippert, op
MODE
SET
of
MODE
SET
om de snelheidskeuze te wijzigen. De beginsnelheid is
Laag, tenzij er een eerdere snelheid is opgeslagen.
5. Druk op
MODE
SET
om de snelheid in te voeren.
6. Druk, terwijl T-Start knippert, op
MODE
SET
of
MODE
SET
om de starttijd in te voeren.
7. Druk op
MODE
SET
om de starttijd in te voeren.
8. Druk, terwijl T-Start knippert, op
MODE
SET
of
MODE
SET
om de stoptijd in te voeren.
9. Druk op
MODE
SET
om de stoptijd in te voeren.
10. "En" (Ingeschakeld) verschijnt standaard op het display. Druk op
MODE
SET
totdat "Dis" op het display
verschijnt om uit te schakelen en
MODE
SET
om te bevestigen. De tekst knippert om aan te geven dat
hij kan worden gewijzigd.
11. Druk op
MODE
SET
om terug te gaan naar het hoofdmenu
• Instelpunten snelheid
1. Druk op
MODE
SET
om het instellingenmenu binnen te gaan.
2. Druk op
MODE
SET
of
MODE
SET
totdat "Spd1" (LAGE snelheid) verschijnt.
3. Druk, terwijl
MODE
SET
knippert, op
MODE
SET
voor de geselecteerde snelheid om de selectie te wijzigen.
4. Druk op
MODE
SET
of
MODE
SET
om de snelheid in stappen van één (1) % te wijzigen. Het bereik ligt tussen 40 en 105%.
OPMERKING
Als u een van beide toetsen indrukt, verandert de snelheid sneller.
5. Druk op
MODE
SET
om de snelheid in te voeren.
OPMERKING
Bij meer dan één (1) minuut inactiviteit wordt de selectie automatisch bevestigd. Als er op
AAN/UIT wordt gedrukt voordat er een tijd is ingevoerd, gaan alle wijzigingen verloren.
1. Druk op
MODE
SET
om het instellingenmenu binnen te gaan.
• Aanzuigen
1. Druk op
MODE
SET
om het instellingenmenu binnen te gaan.
2. Druk op
MODE
SET
of
MODE
SET
totdat "SPri" (LAGE snelheid) verschijnt.
3. Druk, terwijl de cijfers knipperen, op
MODE
SET
om de aanzuigsnelheid in te stellen.
4. Druk op
MODE
SET
of
MODE
SET
om de snelheid in stappen van één (1) % te wijzigen. Het bereik ligt tussen 40 en 105%.
OPMERKING
Als u een van beide toetsen indrukt, verandert de snelheid sneller.
5. Druk op
MODE
SET
om de snelheid in te voeren.
OPMERKING
Bij meer dan één (1) minuut inactiviteit wordt de selectie automatisch bevestigd.
Als er op AAN/UIT wordt gedrukt voordat er een tijd is ingevoerd, gaan alle wijzigingen
verloren.