MONOGRAM SYSTEMS
COMPONENT MAINTENANCE MANUAL with ILLUSTRATED PARTS LIST
BASIC PN 15900
Page 706
Monogram Proprietary – See title page for details
38-31-09
Feb
23/04
(e) Install spray nozzle (135) with washers (130) on each side, securing it
with cotter pin (125).
(f)
Position drive shaft assembly (120) with washer (110) on impeller
housing (115).
(g) Install washer (110), impeller (105), washer (100) and retaining ring
(95) on drive shaft assembly (120).
NOTE:
Add washers (110) as required to provide full
engagement of motor drive shaft. Impeller (105) must
have a minimum clearance of .005 inch (0,13 mm)
between impeller and its housing (115).
(h) Install impeller housing plate (75) with impeller housing (115), using
screws (80), washers (85) and nuts (90) to frame assembly (195).
(i)
Install filter basket (60), using washer (70 or –70A) and nut (65).
CROSS SECTION OF MOUNTING PLATE
Figure 701
(j)
Install seals (55), applying lubricant (Lubriplate 105) as shown in
Figure 701.