MONOGRAM SYSTEMS
COMPONENT MAINTENANCE MANUAL with ILLUSTRATED PARTS LIST
BASIC PN 15900
Page 701
Monogram Proprietary – See title page for details
38-31-09
May
17/02
ASSEMBLY
1. General
A.
Assembly instructions given herein assume the following: disassembly has been
accomplished to the extent covered in DISASSEMBLY. All new parts are
identical in fit and function to the parts they replace.
B.
If a unit has been subject to a partial overhaul only, disregard those instructions
that are not applicable. The assembly instructions detailed in the following
paragraphs apply equally to those assemblies listed in the paragraph heading
unless reference is made in the instructions to a specific assembly for
assemblies. Where two or more details may be installed at a particular location,
the key index numbers of the parts, as assigned in the Illustrated Parts List, are
included parenthetically after the part description. Hardware items like bolts,
washers, nuts and parts made of rubber, removed during disassembly, should be
replaced with new parts.
C.
Each of the following sections describes procedures and materials for assembly
of a major assembly or a component assembly. The part number of each
assembly to which the procedure applies, along with the corresponding exploded
illustration figure, is listed in the paragraph heading.
