MONOGRAM SYSTEMS
COMPONENT MAINTENANCE MANUAL with ILLUSTRATED PARTS LIST
BASIC PN 15900
Page 710
Monogram Proprietary – See title page for details
38-31-09
May
17/02
D.
Timer Assembly, PN 11059-79 (refer to IPL Figure 4)
(1) Procedures
(a) If removed during disassembly, install identification decal (75).
(b) Install grommet (70), sockets (90), plug (85), pins (65), plug (60),
clamp (55), connector (50) and disconnect (45).
(c) Install PC Board assembly (15), using screws (40), terminal lug (35),
lock washer (30), washers (25) and nuts (20).
(d) Install timer plate (5) in timer enclosure (80) using screws (10).
(2) Storage
Instructions
(a) List of Materials
NOTE:
Equivalent substitutes may be used for listed items
ITEM IDENTIFICATION
SOURCE
Bag
Plastic
Commercially available
Barrier Material
MIL-B-121
Any Source
(b) Instructions
If the timer is to be stored after overhaul, seal in a plastic bag, wrap
with barrier material and place in a cardboard carton. Mark part
number and date of overhaul on outside of carton.
