![background image](http://html1.mh-extra.com/html/zodiac/15900-013/15900-013_component-maintenance-manual-with-illustrated-parts-list_3993230039.webp)
MONOGRAM SYSTEMS
COMPONENT MAINTENANCE MANUAL with ILLUSTRATED PARTS LIST
BASIC PN 15900
Page 403
Monogram Proprietary – See title page for details
38-31-09
May
17/02
B. Motor-Pump-Filter
Assembly
(1) Use a soft bristle brush to dislodge solid wastes and lubricants.
CAUTION:
DO NOT PERMIT SOLVENT ON STATOR OR ROTOR
WINDINGS, OR THE ELECTRICAL LEADS, AS SOLVENT
TENDS TO PRECIPITATE DETERIORATION OF WIRE
INSULATION.
(2) Remove adhesives and sealants by carefully scraping residue from surface
and wiping surface with cloth moistened with solvent.
(3) Remove dust and dirt from the housing and stator assembly and the rotor
assembly with dry, compressed air.
(4) Dry all parts with dry, compressed air after cleaning.
C.
Drain Valve Assembly
The valve assembly may be cleaned by immersing and scrubbing the unit in a
solution of soap and water or five tablespoons of liquid disinfectant to each gallon
(3,78 liter) of water. Rinse thoroughly with hot water and dry using compressed
air.
D. Timer
Assembly
Because the timer is sealed when installed, minimal internal cleaning should be
required unless the assembly is contaminated during disassembly and
subsequent overhaul procedures. Blow dust or other foreign particles from
internal parts. If necessary, use a soft-bristled brush to dislodge stubborn
particles.
E.
Liquid Level Transmitter
Because the transmitter is sealed when installed, minimal internal cleaning
should be required unless the assembly is contaminated during disassembly and
subsequent overhaul procedures. Blow dust or other foreign particles from
internal parts. If necessary, use a soft-bristled brush to dislodge stubborn
particles.