ZMODO DVR-H9106UVD-SV, Руководство пользователя

Страница: 12 / 38

7 - Configuring Recording Settings
To access the Record Setup menu, from the Main
Menu, select Record.
On the , some settings on this
page affect how all cameras record.
Individualized camera options are
enabling/disabling recording and recording
H9106UVD-SV
Figure 7-19: Record Setup Menu
USER MANUAL USER MANUAL
8.1 – TYPE
Select the type of network connection the DVR will have.
Static will give the DVR a permanent address on the local network, which is the
preferred setting.
18 17
7.1 – CHANNEL CONFIGURATION SELECT
The CH1~CH4 drop-down menu accesses the respective channel groups for
configuration: CH1-CH4, CH5-CH8, CH9-CH12, and CH13-CH16.
7.2 - RECORD
There is a drop-down menu for each channel. The options are On and Off.
Selecting Off will disable the recording for the desired channel.
7.3 – QUALITY
Choose the quality rate for the recorded video. The options are Best, Fine, and
Normal.
7.4 – RESOLUTION
Selects the recording resolution for all channels. The options are D1, HD1, and
CIF.
In the USA and Canada, the video system should be set to NTSC, whereas
Europe uses PAL.
While a higher resolution will make the video playback smaller, it will also be more
defined and use more storage space.
7.5 – AUDIO
Select Enable or Disable to turn on or off the recording of audio from audio-
supported cameras connected to the audio input channel(s).
7.6 – PACK TIME
Choose the maximum recording time for a single video file. Options are 15, 30,
45 and 60 minutes.
7.7 – RECORDING MODE
Click the Recording Mode drop-down menu to reveal the options, which vary
8 – NETWORK SETUP
By configuring the network settings, the DVR and
cameras can be viewed and controlled remotely
from any computer with an Internet connection.
For complete instructions on configuring your DVR
and network for remote access, please visit
http://zmodo.net or contact Technical Support.
Figure 8-23: Network Setup menu with default
values
slightly by DVR model.
Always
When Recording Mode is set to Always, all channels enabled will record
continuously until turned off.
Schedule
When Recording Mode is set to Schedule, a SCHEDULE button will appear to the
right of the menu.
7.7.1 – SCHEDULE SETUP
A. CHANNEL – Configure each channel individually or all channels as a group
B. Calendar – The days of the week are divided into hour blocks on a 24-hour
clock, with 00 being midnight and 23 being 11:00 PM. This grid blocks are where
recording type options are turned on and off.
C. Check one of these boxes and then click a square in the calendar grid to
change it to that color.
a. Alarm (red) – For alarm trigger or motion
recording.
b. General (green) – continuous recording
c. No Record (black/blue) – Selected channel(s)
will not record during these days and times.
D. FROM SUN TO ALL – Rather than selecting the
same record modes for each day separately, copy t
he record modes from one day to another. Click
COPY to perform the action.
Figure 7- 20: Schedule Setup