ZMODO DVR-H9106UVD-SV, Руководство пользователя

Страница: 21 / 38

USER MANUAL USER MANUAL
Important Note: Setting the resolution too high or out of range for your monitor can result in
losing video output.
To restore correct video settings, follow these steps:
Menu > RIGHTx2 > DOWNx1 > SEL > RIGHTx2 > SELx2 > UPx1 > SEL > DOWNx2 > SEL >
wait 5 seconds > SEL
Volume
Adjusts the volume of the audio output
14.4 – LANGUAGE (SYSTEM LANGUAGE)
To access the System Language menu, go to Main Menu >
System > Language.
Setting the System Language changes all menus and text
to the selected language after rebooting the DVR.
Language options are
English
Русский
(
Russian
)
Italiano (Italian)
Español (Spanish)
Français (French)
Deutsch (German)
ELLHNIKA (Greek)
Português (Portuguese)
Polski (Polish)
14.5 – INFO (SYSTEM INFORMATION)
Access System Information by going to Main Menu > System
> info.
Device Type is a unique hardware identification for the
motherboard.
Software Version is the version of the DVR firmware
(Operating System). Please do not attempt to update the
firmware without first contacting Technical Support.
14.5.1 – DEVICE TYPE
The Device Type is a unique hardware identification for the motherboard.
14.5.2 – SOFTWARE VERSION
Software Version is the version of the DVR firmware (Operating System). There are no
firmware updates for the
.
14.5.3 – MAC ADDRESS
A MAC Address is another unique hardware identification used for a local area network. On
the
, changes to the MAC address cannot be saved.
14.6 – MAINTAIN (SYSTEM MAINTAIN)
H9106UVD-SV
H9106UVD-SV
Figure 14-51: System Language menu
To access System Maintenance, go to Main Menu >
System> Maintain.
In the System Maintenance console, the following
operations can be performed:
·
Schedule automatic reboot
· Update system firmware (no system firmware
updates are available for the )
· Load factory default settings
· Reboot DVR
14.6.1 – AUTO MAINTAIN
Enabling this feature (ON), displays the following additional options:
[insert screen shot here]
14.6.1.1 – AUTO REBOOT
Select the schedule options as follows:
1.
Frequency
a. Every Day
b. Every Week
c. Every month
2. Day or Month
3. Time
4. Apply changes
14.6.2 – SYSTEM UPDATE
There are no firmware updates available for the
.
14.6.3 – LOAD DEFAULT
Clicking the Load Default button will restore all customized settings on the DVR
back to their factory defaults.
It will not erase content on the hard drive.
Before executing the Load Default process, the user will be presented with a
confirmation dialog box [shown below].
14.6.4 – REBOOT
The Reboot command will perform a safe reset of the DVR. A confirmation dialog
H9106UVD-SV
H9106UVD-SV
Figure 14-53: System Maintenance Console
Figure 14-52: System Information
Figure 14-54: Load Default confirmation Figure 14-55: Restart confirmation
36 35