ZMIN X1, Руководство пользователя, Страница: 3 / 43

2
X Series User’s Manual
8010001002
Caution
Only qualified and trained service technicians should attempt to repair the printer.
To avoid getting an electric shock, do not use a worn or damaged power cord. If the power cord
becomes damaged or frayed, replace it immediately.
Be sure that the output of the power adapter is 24VDC and your power source matches the rating listed
on the power adapter. Be certain your power source is grounded.
The printer and power adapter should never be operated in a location where either one can get wet.
Personal injury may result.
Don't stress or impact printers, lest damage printer or lead to printer doesn't operate properly.
Place the printer on a flat, firm, solid surface.
Don’t insert anything into the ventilation slots or openings on the printer
The printer power should be turned off while not in use.
To get increased printhead longevity and higher quality printouts, always use approved labels, tags and
thermal transfer ribbons. Approved supplies can be ordered from your dealer.
The printhead becomes hot while printing. To protect from damaging the printhead and risk of personal
injury, avoid touching the printhead.
The discharge of electrostatic energy that accumulates on the surface of the human body or other
surfaces can damage or destroy the printhead or electronic components used in this printer. You must
observe static-safe procedures when working with the printhead or the electronic components under
the top cover.