ZMIN X1, Руководство пользователя, Страница: 13 / 43

12
8010001002
X Series User’s Manual Chapter 2 Installation & Operation
Connecting the printer
Attaching Power
Caution:
(1) Use of the wrong power adapter could damage your printer. ZMIN Technologies assumes no
liability for any damage in such case. The rating for the printer is 24VDC.
(2) Make sure the AC voltage which you using is accorded with power adapter requirements.
(3)Never operate the printer and power adapter in an area where they can get wet. Serious
personal injury could result!
1. Make sure the printer’s power switch is in the OFF position.
2. Insert the AC power cord into the power adapter.
3. Insert the power adapter’s DC output plug into the DC Jack on the rear of the printer.
4. Plug the other end of the AC power cord into an appropriate AC electrical outlet.
Interface Connection
Notice :
Make sure the printer’s power switch is in the OFF position before connecting the interface
cable.
The X Series printers support a variety of interface options and configurations. These include: USB
interface, RS232 Serial.
1. Any interface can transmit data from the host. Preliminary communications settings are not required
since the printer will automatically detect which interface is active.
2. The default values of printer interface can be obtained from the self-test report. (See Chapter 2
Operation Basics – Advanced Functions - Self Test)
3. Cable configurations for serial (RS-232C) are shown in Appendix A of this guide.
4. Please take the following measures to reduce cable noise.
（
1
）
Reduce the length of the data cable (keep the cable length under 1.83 meters / 6 feet) if required.
（
2
）
Keep the data cable separate from power cords.