TSic LABkit™ User Manual and Technical Description
TSic
TM
LABkit, Rev.2.4, Oct. 18, 2005
Page 7 of 18
© ZMD AG & IST AG, 2005
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior
written consent of the copyright owner.
4.4
The Settings Dialog Window
Open the Settings dialog window by clicking on the Settings button in the main window. To close the Settings
dialog window and apply any new settings, click OK.
Figure 4.2
– TSic Recorder™
Settings Dialog Window
Figure 4.3
– USB / COM Port Setting
4.4.1
USB/COM Port Settings
If Auto is selected (see Figure 4.2 and Figure 4.3), the software automatically looks for the correct PC COM port
when the program starts. On the Interface pull down menu, the configuration ports COM1 through COM16 can
be manually selected. If Auto selects an incorrect port, try searching again by clicking “Scan for Device” or
select the correct port manually in the Interface pull-down menu.
