ZLIM42 Integrated Open Loop Step Motor Manual Version 1.01
ZLIM42 Integrated Open Loop Step Motor Manual Version 1.01
5
Shenzhen ZhongLing Technology Co.,Ltd. TEL: +86-0755-29799302 FAX
：
+86-0755-2912 4283 WEB:
Shenzhen ZhongLing Technology Co.,Ltd. TEL: +86-0755-29799302 FAX
：
+86-0755-2912 4283 WEB:
6
have a high temperature rise, do not touch it;
Please confirm the input and output signals to ensure safe operation;
The alarm can be reset only after the operation signal is cut off. Alarm
resetting in the running signal state will cause the integrated step-servo motor
to restart suddenly;
Do not change the parameter settings of the integrated step-servo
motor at will. The parameter modification needs to be performed under standby
condition.
Maintenance and Inspection
Do not touch the integrated step-servo motor terminals directly, and
some have high voltage, very dangerous;
Before powering up, be sure to install the cover; when removing the
cover, be sure to cut off the power supply first;
Before wiring, please confirm whether the input power is off;
After cutting off the main circuit input power and confirming the
integrated step-servo motor indicator light has completely extinguished, it
can be inspected and maintained;
Do the inspection and maintenance by professional electrical
engineer;
Do not do wiring, disassembling or other operation on the terminals
during power on
.
Have a designated professional electrical engineer perform the
inspection and maintenance work
；
During power-on, do not perform any work such as wiring or removing
terminals.
There is an integrated circuit on the main control board of the
integrated step-servo motor. Please pay full attention when checking to
avoid damage caused by static induction.
