6
1. The administrator
password is authenticated.
2. Press 0.
(The indicator turns green
and makes a long beep.)
3. Press 0.
(The indicator turns green
and makes a long beep.)
5.Exit.
(The device automatically
exits the process when the
operation is completed.)
4. The door is opened
(The indicator turns green
and makes a long beep.)
Note: This function can be used to open the door.
Administrator Password Is Forgotten
If the administrator password is forgotten, you can press the tamper switch
three times to reset the password to the initial administrator password 30 to 60
seconds after the device is disassembled from the wall or door. (There is a long
beep 30 seconds after the device is disassembled from the wall or door.)
1.2 Add Users
Register the fingerprint or card of a user or register cards in batches.
Add Users
1. The administrator
password is authenticated.
2. Press 1.
(The indicator turns green
and makes a long beep.)
3. Register fingerprints or
cards. (Press fingers three
times to get a fingerprint or
swipe the card once.)
Yes
5. Exit.
(Press * to exit.)
4. Adding Users is
successful.
(The indicator turns green
and makes a long beep.)
Failed.
(The indicator turns red
and makes three beeps.)
Note: 1. In the registration process, the user ID increases automatically. The
device automatically enters the process of registering the next user when a user
is successfully registered.
2. The registration process fails if the fingerprint is of poor quality or the
fingerprint or the card has been registered. After the device indicator turns
Поставщик систем безопасности: TELECAMERA.RU
