TS1000 Pro Series Tripod Turnstile
User Manual
P a g e
|
8
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Power-on Test before Installation
1. Please make sure that the power requirements are strictly met to avoid permanent damages to the
unit. Input voltage: AC 100~120V /200~240V.
Note:
The tripod turnstile must be connected to the ground (earth).
2. Power on and wait 30s for the tripod turnstile to finish the self-check program.
3. Lift the arms manually, as shown in Figure 2-3B.
4. Check whether the tripod turnstile and the LED indicators work properly.
If there is any problem, please contact the supplier.
Figure 2-3 A
Figure 2-3 B
3
Equipment Installation
Installation Conditions
The equipment must be installed on concrete ground, ensuring that expansion bolts can be secured firmly.
You are suggested to install an assistant framework or fence to form a passageway, as shown in Figure 3-1.
There is a power switch in the side
direction of this power supply.
Earth wiring terminal
Lift upwards
