TS1000 Pro Series Tripod Turnstile
User Manual
P a g e
|
11
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
3. Install the turnstile on the mounting plate and tighten the screws. Apply screw securing glue before
using and putting gaskets on the screws to adjust the direction of the turnstile. If the tripod turnstile is
not levelled, you can place gaskets to adjust, as shown in Figure 3-5.
Installation levelness
Installation levelness
Figure 3-5
4
Cable Diagram
DIP K1 Switch Configuration
Figure 4-2
Pin
1
2
3
4
5
6
7
8
Function Setting
Opening Duration Direction Indicator Continue Passing Function Alarm
Default
1
1
1
0
1
0
0
0
4.1.1
Setting the Turnstile Opening Duration
Opening duration refers to the period of time from opening to closing once the turnstile receives an
opening signal. In the DIP switch, number 1, 2, and 3 are used for duration settings. It can be set to
different values from 5s to 60s according to the following chart.