TS1000 Pro Series Tripod Turnstile
User Manual
P a g e
|
7
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
2
Unpacking and Testing the Tripod Turnstile
Unpacking
The top part of the tripod is heavy; do not remove the foam lining at the bottom before installation, as
shown in Figure 2-1.
Figure 2-1
Arm Installation
In order to prevent the arm from damaging during transportation, the arm will not be initially installed to
the devices.
Installation procedure
Put the arm kit into the hole of cabinet; make sure the screw holes match with mechanism core, then
tighten 3 hex screws, as shown in Figure 2-2.
Figure 2-2
Do not remove the foam lining at
the bottom before installation.