SpeedFace M4
User Manual
P a g e
| 36
Copyright©2021ZKTECO CO., LTD. All rights reserved.
Subnet Mask
The factory default value is 255.255.255.0. Please set the value as per the
requirements.
Gateway
The factory default address is 0.0.0.0. Please set the value as per the
requirements.
DNS
The factory default address is 0.0.0.0. Please set the value as per the
requirements.
TCP COMM. Port
The factory default value is 4370. Please set the value as per the requirements.
DHCP
Dynamic Host Configuration Protocol, which is to dynamically allocate IP
addresses for clients via server.
Display in Status Bar
To set whether to display the network icon on the status bar.
5.2
Serial Comm
Menu
Description
Serial Port
Including no using, RS232(PC) and RS485(PC), select RS232(PC) to
communicate with the device through an RS232 serial port. Select RS485(PC)
to communicate with the device through an RS485 serial port.
Baudrate
The rate of the communication with PC; there are 5 options of baud rate:
115200 (default), 57600, 38400, 19200 and 9600. The higher is the baud rate,
the faster is the communication speed, but also the less reliable. In general, a
higher baud rate can be used when the communication distance is short;
when the communication distance is long, choosing a lower baud rate would
be more reliable.
