ZKTeco ProCapture-T, Руководство пользователя

Страница: 49 / 69

Error! Use the Home tab to apply
标题
1 to the text that you want to appear here.
41
other one is installed outside the door (slave device). The two devices communicate via Wiegand signal.
The Wiegand format and Output type (User ID / Badge Number) adopted by the master device and slave
device must be consistent.
In the initial interface, press > Access Control > Anti-passback Setup to enter the Anti-passback
Setup
interface. Select Anti-passback Direction.

Anti-Passback Direction
No Anti-passback: Anti-Passback function is disabled, which means passing verification of either master
device or slave device can unlock the door. Access records are not reserved.
Out Anti-passback: After a user checks out, only if the last record is a check-in record can the user check
out again; otherwise, the alarm will be triggered. However, the user can check in freely.
In Anti-passback:
After a user checks in, only if the last record is a check-out record can the user check in
again; otherwise, the alarm will be triggered. However, the user can check out freely.
In/Out Anti-passsback:
After a user checks in/out, only if the last record is a check-out record can the
user check in again, or a check-in record can the user check out again; otherwise, the alarm will be
triggered.
Out
Master Device
Slave Device
User
Door
In