ZKTeco G3 Pro Скачать руководство пользователя

Страница: 2 / 70

Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form.

All parts of this manual belong to ZKTeco co., LTD and its subsidiaries (hereinafter the "Company" or "ZKTeco").

Trademark

is a registered trademark of ZKTeco. Other trademarks involved in this manual are owned by their

respective owners.

Disclaimer

This manual contains information on the operation and maintenance of the ZKTeco equipment. The copyright in all the

documents, drawings, etc. in relation to the ZKTeco supplied equipment vests in and is the property of ZKTeco. The

contents hereof should not be used or shared by the receiver with any third party without express written permission of

ZKTeco.

The contents of this manual must be read as a whole before starting the operation and maintenance of the supplied

equipment. If any of the content(s) of the manual seems unclear or incomplete, please contact ZKTeco before starting

the operation and maintenance of the said equipment.

It is an essential pre-requisite for the satisfactory operation and maintenance that the operating and maintenance

personnel are fully familiar with the design and that the said personnel have received thorough training in operating and

maintaining the machine/unit/equipment. It is further essential for the safe operation of the machine/unit/equipment

that personnel has read, understood and followed the safety instructions contained in the manual.

In case of any conflict between terms and conditions of this manual and the contract specifications, drawings, instruction

sheets or any other contract-related documents, the contract conditions/documents shall prevail. The contract specific

conditions/documents shall apply in priority.

ZKTeco offers no warranty, guarantee or representation regarding the completeness of any information contained in this

manual or any of the amendments made thereto. ZKTeco does not extend the warranty of any kind, including, without

limitation, any warranty of design, merchantability or fitness for a particular purpose.

ZKTeco does not assume responsibility for any errors or omissions in the information or documents which are referenced

by or linked to this manual. The entire risk as to the results and performance obtained from using the information is

assumed by the user.

ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or

exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business

information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in

or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.

This manual and the information contained therein may include technical, other inaccuracies or typographical errors.

ZKTeco periodically changes the information herein which will be incorporated into new additions/amendments to the

Содержание G3 Pro







































































Результаты поиска

Содержание G3 Pro

Отзывы:

Похожие инструкции для G3 Pro

Бренды по названию

Популярные бренды

ZKTeco G3 Pro, Руководство пользователя

Результаты поиска

Содержание G3 Pro

Отзывы:

Похожие инструкции для G3 Pro

Бренды по названию

Популярные бренды