ZKTeco G3 Pro Скачать руководство пользователя | Manualshive

Страница: 15 / 70

background image

8 G3 Pro User Manual

Note:

If you have registered only your fingerprint, you will access the fingerprint verification interface directly after

entering your ID. If you have registered in multiple verification modes, the icons of registered verification modes are
displayed, as the above figure with Password, Fingerprint and Face displayed.

1.9.3 Facial Verification



1:N Facial Verification

Compare the facial image captured by the camera with all facial data in the device.



The device automatically differentiates between face and fingerprint verification modes. Show your face within
the capture area of the camera (without your finger being placed at the fingerprint scanner), and the device
automatically performs detection in face verification mode.

Conduct comparison in the correct way on Verification passed.
the main interface.



1:1 Facial Verification

Compare the captured facial image with the facial image associated with the entered user ID.

Note:

If the device prompts "No data registered" after the user enters the ID and press [

OK

], then the user corresponding

to this ID does not exist.

1.Enter the user ID into the main interface 2.Compare the faces in the right way.
by using the keypad and then press [

OK

].

Tap the Fingerprint icon to access the
fingerprint verification interface.

Press your finger onto the fingerprint scanner to scan
your fingerprint for verification. The result is displayed

as above.

«
...
13
14
15
16
17
...
»

Содержание G3 Pro







































































Отзывы:

Нет отзывов

Похожие инструкции для G3 Pro

Бренд: ATS Страницы: 7

Бренд: Lindy Страницы: 1

Бренд: AMX Страницы: 1

Бренд: Extron electronics Страницы: 2

Бренд: Amana Страницы: 2

Бренд: Ambient Weather Страницы: 5

Бренд: Sapling Страницы: 123

Бренд: ONLYWELL Страницы: 12

Бренд: Oregon Scientific Страницы: 76

Бренд: Easy Clocking Страницы: 32

Бренд: Hama Страницы: 13

Бренд: Lathem Страницы: 54

Бренд: Harbor Freight Tools Страницы: 5

Бренд: Lathem Страницы: 20

Бренд: Digoo Страницы: 2

Бренд: Velleman Страницы: 7

Бренд: Digoo Страницы: 4

00113982 "AG-300"

Бренд: Hama Страницы: 11

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды