Facial Capture & Identification Camera Series Configuration Manual
24
5.1.2.2 Face Param
Face parameters are used to set the mode, parameters and boundaries when capturing.
The interface is shown in the figure.
Function
Insturction
Face Confidence
After checking "Face Belief", a round of "non-face" judgment will be
pushed out before the face capture. For example, the false grasp of
non-face such as wheels, animal faces and so on can be filtered out by
this function.
Snap Mode
Automatic mode:
1. Under the condition of face detection, in the same Track, one face
image with the best quality is pushed in the capture interval.
2. The total number of snapshots from a single face entering the
detection area to leaving the detection area is equal to less than the set
number of snapshots.
3. Minimum face pixel is 30;
4. The time interval support for snapping push pictures is set to 80ms,
200ms, 500ms, 1s, 2S and 4s.
Optimal mode:
Under the condition of face detection, in the same Track, N face images
with the best quality are pushed in the capture interval. Default working
mode
Fast mode:
