Facial Capture & Identification Camera Series Configuration Manual
27
Click "Select Cloth Protection" and fill in the name of the face in "Face Name".
"Recognition threshold" defaults to "73" and "comparison upper limit" defaults to "1".
If you want to adjust the size of "recognition threshold" and "comparison upper limit", you
can enter the value you want to adjust in the corresponding box.
After completing the above information, click
below the query face and enter
the interface as shown.
If you want to import an existing face image, you can click Add, and the following
interface appears. After completing the following information, click Check, and if you want
to re-enter the information, click Cancel.
After clicking Check, an interface appears as shown in the following figure. Click
"
”, you can add the corresponding face image, and then click"OK", you can
