Facial Capture & Identification Camera Series Configuration Manual
36
1
8.1.3 Communication Configurations(only FI710)
The serial interface is used to configure the parameters of RS485 serial port and to match
the interface. Customers can set the connection according to the actual environment.
Port baud rate and protocol, interface as shown in the figure.
8.1.4 WieGand Config(only FI710)
The Wigan interface supports standard Wigan 26bit and 34bit protocols, which can be
selected through drop-down boxes. This function is only partially supported by the model.
port
The current port name of the device
Calibration
time
interval
For setting the calibration interval of equipment, the interval can be set to
~ 1440 minutes, default to 60 minutes.
