Facial Capture & Identification Camera Series Configuration Manual
29
"Unbinding" is used to unbind the face information in the face database. Check
before you want to unbind information“
”,click Unbound to unbind the selected
information.
“
”is the return key, it is used to return to the previous level.
5.2.1.2 Linkage Alarm
The linkage alarm interface is used to set the type of alarm in face recognition. The
interface is shown in the figure.
Function
Instruction
Face Group
"Face database" has a drop-down box, drop-down select the face database,
then select the face database of linkage alarm.
Record Enable
When "Video Enabling" is checked, alarm will be generated when the face
picture is captured, and the system will automatically record the video.
Pre-recording time: Before the alarm starts, the alarm video will be
prerecorded for a period of time. Customers can set the time according to
their needs.
Delay time: When the alarm is over, the alarm video will be extended for a
period of time before stopping. Customers can set the time according to
their needs.
Relay-out Enable
After checking the "alarm output enablement", the alarm linkage output
portwillbeactivated.Whenthealarmisgeneratedbycapturingtheface
picture, the system can link the corresponding alarm output device.
Alarmoutputdelay:When thealarmisover,thealarmisextended fora
period of time to stop.
Alarm output channel: At present, one channel is supported for alarm.
Whenthealarmoutputisenabled,thealarmoutputchannel1willbe
