figure 1 figure 2
Note:
The PC (server) must be on the same network segment as the router (wireless network).
6)
Switch network connection in the software.
For ZKAccess3.5 software
: Select the added C5S control panel on the Device page and click [More…] > [Set up WiFi], as figure 3, set the WIFI
parameters of the control panel based on the router parameters. Restart the control panel to make the WIFI settings take effect.
figure 3
Note
:
You must add the C5S control panel to the software through TCP/IP before setting WIFI parameters. Connection through RS485 is not
allowed. Of the devices added to the software, only the C5S control panel supports WIFI setting. For details about how to add devices and set
WIFI, see the software instructions.
