1) Meaning of LED indicators:
POWER indicator (red): light always indicates control panel is power on. RUN indicator (green): flashing indicates the system works normally.
COMM1 indicator (yellow): flashing indicates the system is communicating with upper-level devices (for example, the PC).
COMM2 (yellow): flashing indicates the system is communicating with lower-level devices (for example, readers).
WLAN indicator (green): flashing indicates the system is communicating in wireless (WIFI) mode.
DOOR indicator (green): flashing indicates a door opening signal (a door is opened).
2) Recommended use of wires:
Interface
Wire Specification
Network cable
Maximum length
Power (A)
18AWG*2PIN
/
1.5M
Wiegand (B)
24AWG*6PIN
(6PIN, 8PIN, 10PIN for different readers)
CAT-5 or above network cable, one way
DC impedance less than 100Ω/KM
100M
Electric Lock (C)
18AWG*2PIN+24AWG*2PIN.
18AWG*2PIN for lock connection,
24AWG*2PIN for door sensor connection.
/
50M
Button (D)
24AWG*2PIN
/
100M
EXT RS485 (E)
20AWG*2PIN+24AWG*2PIN,
20AWG*2PIN for reader power supply,
24AWG*2PIN for RS485 communication
CAT-5 or above network cable, one way
DC impedance less than 100Ω/KM. In
wire connection, +12V and GND of
power supply need to be parallel and
use double wires.
Share power with control
panel: 100M
Use independence power
supply (connect RS485 signal
interface only): 1000M
3) The auxiliary input may be connected to infrared body detectors, fire alarms, or smoke detectors. The auxiliary output may be connected to
alarms, cameras or door bells, etc.
4) State Indicators are connected to the chassis, with is power indicator, run status indicator and communication status indicator.
5) PC RS485 indicates the RS485 cable is connected to the PC through this port. The EXT RS485 port can be connected externally to RS485 reader.
6) The USB slot is primarily used for control panel upgrade. For details, see the user manual.
4. LED Indicators and Wire Illustration
Rotary DIP Switch
Wiegand Reader 1
EXT RS485
Wiegand Reader 2
Antenna Connector
Wiegand Reader 4
Wiegand Reader 3
PC RS485
Ethernet/PoE
Interface
USB
Reset
Disassembly/
Mains/Battery
Abnormality
Alarm
Power
Input
Auxiliary
Input
Auxiliary
Output
#1 Door
State Indicator
#2 Door
