ZKT ZKSD3 Series, Руководство пользователя

Страница: 10 / 22

2 Install and Network Configuration
7
2 Installation and Network Configuration
2.1 Hardware Installation

Installation Notices
1. Read through the guide for installation prior to installation.
2. Check whether any component is missing against the packing list, if yes, please contact your supplier.
3. Wire during power off. If the camera does not function normally during operation, please cut off the power before
check.

Notice : The wiring during power on may seriously damage the camera, which will be disqualified from the
guarantee.
4. Please use the power ( voltage 24V AC and rating current no lower than 2A ) provided by the factory for the
cameras. Much higher or lower voltage and direct current power may cause the camera failure.
5. Use the standard power cord when the power supply is too far away from the camera, and consider the voltage drop
caused by long distance.
6. Read through the instructions for connecting terminal and wire strictly according to interfaces. Any damage to the
camera due to improper operation will be disqualified from the guarantee.
7. All the exposed parts of connecting terminal should not exceed 5mm, in order to prevent any accidental contact from
damaging the camera.
Do not connect cables when power is on!
AC24V/2A