Zizito MARS, Инструкция по эксплуатации

Страница: 58 / 94

58
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
• Uw kinderstoel heeft 2 verstelbare tafelposities.
• Om de tafel aan te passen, drukt u op de ontgrendelingsclip onder de lade en trekt
u deze omhoog om te verwijderen. Bevestig de lade opnieuw in de gewenste positie.
Steek de haken in de gewenste gleuven op de armen van het zitgedeelte. Draai de tafel
naar beneden en druk hem stevig op zijn plaats. De lade klikt eenmaal vast.
Aanpassing van het tafelblad
4 9
3
4
Your highchair has 2 adjustable tray positions.
To adjust the tray, press in the release clip located underneath the tray and pull
upwards to remove. Re-attach the tray in your preferred position. Insert the hooks
into the preferred slots on the seat unit arms. Rotate tray down and press firmly
into position. The tray will click once secure.
1
2
CLICK
3. Located on the top of each upper leg is a metal spring pin. Press in this pin
and insert upper legs into the allocated holes located underneath the seat unit
(A). The pin will appear through the seat unit corresponding hole when locked
into position.
Repeat for all 4 upper legs (including the two assembled to footrest).
A
C
4. Located on the bottom of each upper leg is a metal spring pin. Press in this
pin and attach lower legs (D) onto the bottom of the upper legs. The pin
will appear through the corresponding hole when locked into position.
Repeat for all 4 lower legs.
D
spring pin
spring pin
Klik