Zizito MARS, Инструкция по эксплуатации

Страница: 57 / 94

56
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
1. Bevestig de voetensteun (F) aan de voetensteun (E). Steek de voetsteunpennen in de
daarvoor bestemde gaten op de voetsteun. Schuif de voetsteun naar rechts om hem op
zijn plaats te vergrendelen.
Om te verwijderen, schuift u de voetsteunnaar links en trekt u deze weg van de
voetsteun.
2. Neem twee bovenbenen (C) en schuif ze door de daarvoor bestemde gaten in de
gemonteerde voetsteun.
Montage
1. Attach the footrest (F) to the footrest support (E). Insert the footrest pegs
into holes allocated on the footrest support. Slide footrest to the right to lock
into position.
To remove, slide footrest to the left and pull away from footrest support.
10
3
E
F
2. Take two upper legs (C) and slide them through the allocated holes in the
assembled footrest.
C
Your highchair converts to a junior chair.
To adjust the leg height, remove the lower legs. Press in the metal spring pin
located at the bottom of the upper leg and pull lower leg away.
Repeat for all 4 lower legs.
WARNING! Do not adjust the height when child is in the seat.
HIGHCHAIR
JUNIOR CHAIR
footrest peg
spring pin
1.
Attach the footrest (F) to the footrest support (E). Insert the footrest pegs
into holes allocated on the footrest support. Slide footrest to the right to lock
into position.
To remove, slide footrest to the left and pull away from footrest support.
10
3
E
F
2.
Take two upper legs (C) and slide them through the allocated holes in the
assembled footrest.
C
Your highchair converts to a junior chair.
To adjust the leg height, remove the lower legs. Press in the metal spring pin
located at the bottom of the upper leg and pull lower leg away.
Repeat for all 4 lower legs.
WARNING! Do not adjust the height when child is in the seat.
HIGHCHAIR
JUNIOR CHAIR
footrest peg
spring pin
Voetsteunpen
Klik
57
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
3. Op de bovenkant van elk bovenbeen zit een metalen veerpen. Druk deze pin in en
steek de bovenbenen in de daarvoor bestemde gaten onder het zitgedeelte (A). De pin
zal door het overeenstemmende gat van het stoel verschijnen wanneer deze op zijn
plaats wordt vergrendeld.
Herhaal voor alle 4 de bovenbenen (inclusief de twee die aan de voetensteun zijn
gemonteerd)
4. Aan de onderkant van elk bovenbeen bevindt zich een metalen veerpen. Druk deze
pin in en bevestig de onderbenen (D) aan de onderkant van de bovenbenen. De pin
zal door het overeenstemmende gat verschijnen wanneer hij op zijn plaats wordt
vergrendeld. Herhaal voor alle 4 de onderbenen.
Montage
4 9
3
4
Your highchair has 2 adjustable tray positions.
To adjust the tray, press in the release clip located underneath the tray and pull
upwards to remove. Re-attach the tray in your preferred position. Insert the hooks
into the preferred slots on the seat unit arms. Rotate tray down and press firmly
into position. The tray will click once secure.
1
2
CLICK
3. Located on the top of each upper leg is a metal spring pin. Press in this pin
and insert upper legs into the allocated holes located underneath the seat unit
(A). The pin will appear through the seat unit corresponding hole when locked
into position.
Repeat for all 4 upper legs (including the two assembled to footrest).
A
C
4. Located on the bottom of each upper leg is a metal spring pin. Press in this
pin and attach lower legs (D) onto the bottom of the upper legs. The pin
will appear through the corresponding hole when locked into position.
Repeat for all 4 lower legs.
D
spring pin
spring pin
4 9
3
4
Your highchair has 2 adjustable tray positions.
To adjust the tray, press in the release clip located underneath the tray and pull
upwards to remove. Re-attach the tray in your preferred position. Insert the hooks
into the preferred slots on the seat unit arms. Rotate tray down and press firmly
into position. The tray will click once secure.
1
2
CLICK
3.
Located on the top of each upper leg is a metal spring pin. Press in this pin
and insert upper legs into the allocated holes located underneath the seat unit
(A). The pin will appear through the seat unit corresponding hole when locked
into position.
Repeat for all 4 upper legs (including the two assembled to footrest).
A
C
4.
Located on the bottom of each upper leg is a metal spring pin. Press in this
pin and attach lower legs (D) onto the bottom of the upper legs. The pin
will appear through the corresponding hole when locked into position.
Repeat for all 4 lower legs.
D
spring pin
spring pin
Veerpen
Veerpen
Klik
Klik