Zizito MARS, Инструкция по эксплуатации

Страница: 16 / 94

16
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а 1b 1c
3
2
Folding Hook
13
1. Attach the footrest (F) to the footrest support (E). Insert the footrest pegs into holes
allocated on the footrest support. Slide footrest to the right to lock into position.
To remove, slide footrest to the left and pull away from footrest support.
2. Take two upper legs (C) and slide them through the allocated holes in the assembled
footrest.
Assembly
1.
Attach the footrest (F) to the footrest support (E). Insert the footrest pegs
into holes allocated on the footrest support. Slide footrest to the right to lock
into position.
To remove, slide footrest to the left and pull away from footrest support.
10
3
E
F
2.
Take two upper legs (C) and slide them through the allocated holes in the
assembled footrest.
C
Your highchair converts to a junior chair.
To adjust the leg height, remove the lower legs. Press in the metal spring pin
located at the bottom of the upper leg and pull lower leg away.
Repeat for all 4 lower legs.
WARNING! Do not adjust the height when child is in the seat.
HIGHCHAIR
JUNIOR CHAIR
footrest peg
spring pin
1.
Attach the footrest (F) to the footrest support (E). Insert the footrest pegs
into holes allocated on the footrest support. Slide footrest to the right to lock
into position.
To remove, slide footrest to the left and pull away from footrest support.
10
3
E
F
2.
Take two upper legs (C) and slide them through the allocated holes in the
assembled footrest.
C
Your highchair converts to a junior chair.
To adjust the leg height, remove the lower legs. Press in the metal spring pin
located at the bottom of the upper leg and pull lower leg away.
Repeat for all 4 lower legs.
WARNING! Do not adjust the height when child is in the seat.
HIGHCHAIR
JUNIOR CHAIR
footrest peg
spring pin
Footrest peg
CLICK