17
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Mobile & spielzeug montage
1. Hängen Sie das Spielzeug
an die Stange. 4.a.
7
8
TOY BAR &RING BALL &TOYS ASSEMBLY
parts list
toys
1.a
2.a
3.a
4.a
plastic toy bar(4pcs)
hang the toys on the bar 4.a
connect the toy bar 3.a with 2.a.
connect the bar 2.a with 1.a.
hang the bar 4.a on ring ball.
CHANGER TABLE ASSEMBLY
parts list
short tube(2pcs)
long tube(2pcs)
after assembly
insert the short tube into the short side's fabric tunnel; and insert the long tube into the
long fabric tunnel side. the short hook should put inward as the pic.
connect the short tube with long tube,
the spring will be locked in the hole.
put the assembled changer on top rail.
push and make sure the hook firmly grap
the top rail.
7
8
TOY BAR &RING BALL &TOYS ASSEMBLY
parts list
toys
1.a
2.a
3.a
4.a
plastic toy bar(4pcs)
hang the toys on the bar 4.a
connect the toy bar 3.a with 2.a.
connect the bar 2.a with 1.a.
hang the bar 4.a on ring ball.
CHANGER TABLE ASSEMBLY
parts list
short tube(2pcs)
long tube(2pcs)
after assembly
insert the short tube into the short side's fabric tunnel; and insert the long tube into the
long fabric tunnel side. the short hook should put inward as the pic.
connect the short tube with long tube,
the spring will be locked in the hole.
put the assembled changer on top rail.
push and make sure the hook firmly grap
the top rail.
7
8
TOY BAR &RING BALL &TOYS ASSEMBLY
parts list
toys
1.a
2.a
3.a
4.a
plastic toy bar(4pcs)
hang the toys on the bar 4.a
connect the toy bar 3.a with 2.a.
connect the bar 2.a with 1.a.
hang the bar 4.a on ring ball.
CHANGER TABLE ASSEMBLY
parts list
short tube(2pcs)
long tube(2pcs)
after assembly
insert the short tube into the short side's fabric tunnel; and insert the long tube into the
long fabric tunnel side. the short hook should put inward as the pic.
connect the short tube with long tube,
the spring will be locked in the hole.
put the assembled changer on top rail.
push and make sure the hook firmly grap
the top rail.
2. Verbinden Sie die
Spielzeugstange 3.a mit 2.a.
3. Verbinden Sie die Leiste 2.a
mit 1.a.
4. Hängen Sie die Stange 4.a
an die Ringkugel.
Liste der Einzelteile
Plastikspielzeugstange (4 Stück)
7
8
TOY BAR &RING BALL &TOYS ASSEMBLY
parts list
toys
1.a
2.a
3.a
4.a
plastic toy bar(4pcs)
hang the toys on the bar 4.a
connect the toy bar 3.a with 2.a.
connect the bar 2.a with 1.a.
hang the bar 4.a on ring ball.
CHANGER TABLE ASSEMBLY
parts list
short tube(2pcs)
long tube(2pcs)
after assembly
insert the short tube into the short side's fabric tunnel; and insert the long tube into the
long fabric tunnel side. the short hook should put inward as the pic.
connect the short tube with long tube,
the spring will be locked in the hole.
put the assembled changer on top rail.
push and make sure the hook firmly grap
the top rail.
7
8
TOY BAR &RING BALL &TOYS ASSEMBLY
parts list
toys
1.a
2.a
3.a
4.a
plastic toy bar(4pcs)
hang the toys on the bar 4.a
connect the toy bar 3.a with 2.a.
connect the bar 2.a with 1.a.
hang the bar 4.a on ring ball.
CHANGER TABLE ASSEMBLY
parts list
short tube(2pcs)
long tube(2pcs)
after assembly
insert the short tube into the short side's fabric tunnel; and insert the long tube into the
long fabric tunnel side. the short hook should put inward as the pic.
connect the short tube with long tube,
the spring will be locked in the hole.
put the assembled changer on top rail.
push and make sure the hook firmly grap
the top rail.
