16
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Assembly Instructions
Unfold the Baby Stroller
• Take the stroller out of the package as shown in Fig. 1a
• Unfold the folding hook, pull the handlebar and gradually push to
open the stroller until a „click“ sound is heard as shown in
Fig. Ib and 1c
Install the Front Wheels
As shown in Fig. 2, attach each wheel to
the front wheel axle till a “click”
sound is heard.
Install the Rear wheel
As shown in Fig. 3, insert the rear wheels
into the rear wheel axle till a „click“ sound
is heard and ensure the rear wheels are
locked and cannot be pulled out.
1а
1b
1c
3
2
Folding Hook
13
Aufbau
4. Drücken Sie die Mitte der Basis
des Laufstalls nach unten, bis sie
horizontal positioniert ist und
einrastet.
5. Setzen Sie die
Stabilisierungsrohre ein.
6. Legen Sie die Matratze mit der
gepolsterten Seite nach oben in
den Laufstall.
5
6
TO OPEN
remove the playpen from the carry bag.
unfasten the velcro straps.
put the four legs of the playpen open,
on a flat surface,while holding up
the base of the playpen.
pull upwards on the side rails until they
lock into place.
push the centre of the base of the playpen
down until it is horizontally positioned
and locks into place.
connect the bassinet tubes.
place the mattress inside the playpen
with padded side facing up.
6
5
4
5
6
TO OPEN
remove the playpen from the carry bag.
unfasten the velcro straps.
put the four legs of the playpen open,
on a flat surface,while holding up
the base of the playpen.
pull upwards on the side rails until they
lock into place.
push the centre of the base of the playpen
down until it is horizontally positioned
and locks into place.
connect the bassinet tubes.
place the mattress inside the playpen
with padded side facing up.
5
6
TO OPEN
remove the playpen from the carry bag.
unfasten the velcro straps.
put the four legs of the playpen open,
on a flat surface,while holding up
the base of the playpen.
pull upwards on the side rails until they
lock into place.
push the centre of the base of the playpen
down until it is horizontally positioned
and locks into place.
connect the bassinet tubes.
place the mattress inside the playpen
with padded side facing up.
