Ziton ZP1-X3, Руководство по установке

Страница: 54 / 88

Chapter 3: Configuration and commissioning
48 ZP1-X3 Installation Manual
Auxiliary 24 V reset
Use this menu to configure the auxiliary 24 V reset setting, on or off. The default
setting is OF.
To configure the 24 V reset:
1. Set the display as shown below, and then press Enter.
2. Select a value using the value selection buttons (2 and 4).
3. Press Enter.
4. Save your changes.
The available settings for this feature are shown below.
Display Description
Resetting the control panel resets the AUX 24V output.
Resetting the control panel does not reset the AUX 24V
output.
Configuration, software, and PCB identification
Use the menu options shown below to see the control panel software version,
configuration version, configuration date and time stamps, and the PCB serial
number. For expansion boards, you can also see the software version and PCB
serial number.
These details may be required for troubleshooting and technical support.
Software version
Configuration version
Configuration time stamp
Configuration date stamp
Control panel PCB serial number
The “software version” and “control panel PCB serial number” menus display a
submenu that lets you select the object of interest.