Zirkon zahn S600 ARTI, Руководство оператора и по техническому обслуживанию

Страница: 36 / 40

36 36 CHAPTER 6
CLEANING AND MAINTENANCE
MAINTENANCE AND CONTROL
Regular controls
Before commencing any operation with the S600 ARTI / S900 ARTI Scanner, the
following controls must be executed in this order:
- Visual inspection of mechanical components.
- Functional check of the electronic components.
- Functional check of the mechanical components.
- Visual inspection of the equipment's interior for damages or impurity.
If after inspection defects are detected, the S600 ARTI / S900 ARTI Scanner may not be used. The
device must be shut down and secured against unauthorised access. For trouble shooting please
contact our
Zirkonzahn Support: Tel. +39 0474 066 630, support@zirkonzahn.com
or the service centres specified in your maintenance contract.
Disconnect the device from power supply
During any maintenance or cleaning, the S600 ARTI / S900 ARTI Scanner must be
disconnected from power supply.