Zirkon zahn S600 ARTI, Руководство оператора и по техническому обслуживанию

Страница: 14 / 40

14 14 CHAPTER 1
SAFETY / RESIDUAL RISKS
TRANSPORT, UNPACKING AND SETTING UP OF THE EQUIPMENT
- The transport must be carried out only with sufficient personnel, according to the national
industrial safety regulations.
- For the pallet’s transport the use of a forklift truck is recommended. Caution when lifting!
- The S600 ARTI / S900 ARTI Scanner may only be moved and put down on surfaces with
suitable stability, in a dry place and in a non-corrosive environment.
- Stable, non-slip installation surface, which can bear a minimum weight of 300 kg.
- Caution when removing the cardboard casing (glass cladding).
- Pay attention to danger of injury when unpacking and setting up the scanner.
- Power supply must be installed and attached by an expert.
- The scanner must not be connected to the electric circuit during the installation phase:
Danger of electric shock.
- The original packaging has to be kept for at least 1 year.
- Safety procedures at the site of the installation:
Stable, flat and dry installation surfaces for the equipment.
- Safety distance of min. 2 m to combustible material.
- Safety distance of min. 2 m to water.
- Safety distance of min. 1.5 m to all sides (for cooling air, access).
DISPATCH AND FREIGHT COSTS
Unless otherwise agreed in writing, the buyer is responsible for dispatch, freight and possible
import fees.
Check the delivery for completeness and integrity immediately after receipt.
Evident defects must be noted on the delivery notes, in order to claim for compensation against the
forwarding company.
In case of complaints, have the transport documents countersigned by the carrier and send a copy
to Zirkonzahn.
Indication on transport packaging (fragile, this side up).