7
Removing The Insulating Tab On Remote Control
Pull out the plastic tab from the remote control if it is being used for the first time.
Battery Installation
If the remote control fails to function even when it is operated very close to the
OPS-8, please replace the 3V lithium battery (CR2025 or equivalent).
1. Press and hold the battery slot in the direction of the arrow
1
as illustrated
above.
Note:
Be careful when you press the slot of the battery holder.
2. Pull out the battery holder completely in the direction of arrow
2
as
illustrated above.
3. Remove the old battery, and replace the new battery in the holder.
4. Push the holder back into the remote control.
Note:
•
The battery may explode if it is incorrectly replaced or disposed of in fire.
•
Replace with only CR2025 or equivalent
•
Do not short circuit battery
•
Do not attempt to recharge the battery
•
Keep all batteries away from young children
•
Seek medical attention if battery is ever swallowed
•
Do not replace battery while in direct sun light or near excessive heat
