Zippie Salsa M Скачать руководство пользователя

Страница: 65 / 72

ZIPPIE SALSA & SALSA

CAUTION!

If you are in any doubt about the performance requirements

of your wheelchair contact your Sunrise Medical authorised

dealer.

NOTE:

Only the tasks in the GREEN boxes below should

be attempted by the user. If you are in any doubt, please

contact your Sunrise Medical authorised dealer.

12.17 Re-use

Due to its construction the Salsa M / Salsa is ideal for

inside use (low seat height, compact dimensions) as

well as outside use (12“, 13“ and 14“ rear wheels, lights,

50Ah/60Ah batteries, etc.).

Its high level of flexibility, due to the number of possible

adjustments, and the modular platform technology (modu-

lar construction system) make the Zippie Salsa M / Salsa

ideal for re-use.

Individual modules (seat tilt in space, backrest angle

adjustment) can be fitted and removed very quickly and

within the seating system there are a range of possibilities

so that individual adjustments can be made to suit the end

user.

Optional mounting of the operating unit on the left or right

side of the chair, with the possibility of changing later, and

adjustable distance from the backrest.

12.16 Performance checks

After performing any maintenance or repairs on the

wheelchair you must make sure that it is functioning

correctly before it is used.

• Visually inspect the wheelchair to make sure the

legrests, armrests etc are correctly positioned and

attached to the wheelchair and all fasteners are

sufficiently tightened.

• Make sure that the backrest is correctly fitted and

adjusted.

• Make sure that all of the cushions are in place

• Switch on the hand control – Do the lights flash? This

signifies that there is a fault in the electronic system.

Refer to section 8 for basic troubleshooting.

• Perform the parking brake check.

• Operate all of the electric options, including lights

and indicators (if fitted) to make sure that they work

correctly.

• With the seating in an elevated position, drive the

wheelchair to make sure that the ‘creep’ mode works

which will slow the wheelchair.

• Drive the wheelchair in each of the drive profiles to

make sure the wheelchair performs as it did before.

Maintenance & Inspection Schedule

Daily

eekly

Quarterly

Six monthly

Annually

Check battery level indicator and charge if necessary

Check the joystick of the hand control is not bent or damaged

Ensure all removable parts are securely fastened

Check lapstrap for wear and make sure the buckle is operational

Parking brake test

Check tyres and inflate

Ensure lights and indicators are operational and clean

Ensure all cables and connectors are sound and are tidy and out of

the way

Clean wheelchair and upholstery

Battery terminal inspection – Remove any corrosion and apply

Vaseline

Check upholstery, seating, headrests, armpads and calfpads for

wear

Complete inspection, safety check and service should be made

by a Sunrise Medical authorised dealer

Fig. 12.35

Содержание Salsa M









































































Результаты поиска

Содержание Salsa M

Отзывы:

Похожие инструкции для Salsa M

Бренды по названию

Популярные бренды

Zippie Salsa M, Инструкция по применению

Результаты поиска

Содержание Salsa M

Отзывы:

Похожие инструкции для Salsa M

Бренды по названию

Популярные бренды