62
ZIPPIE SALSA & SALSA M
Zippie SALSA M
Parts in the battery box (Fig. 12.22):
Plastic battery box cover for 2 x 12V batteries.
•
2 x battery looms with fuse and ring terminals.
•
Battery link harness with red and grey connectors.
•
Battery Access
Locate & loosen the 2 hand wheels at the front of the
•
power base (Fig. 12.23).
Pull the spring loaded catch (Fig. 12.24).
•
Carefully tilt the seat back (Fig. 12.25).
•
Support the seat with the seat stay (Fig. 12.25).
•
Ensure the plastic cap, clips over the end to secure
•
the seat.
The Battery Cover is secured by 6 plastic rivets. Use a
•
flat blade screw driver to lift out the rivets.
Lift the Battery Cover clear.
•
Disconnect the GREY plug on the front battery.
•
Lift the front battery out using the lifting straps pro-
•
vided.
Disconnect the GREY plug on the rear battery (Fig.
•
12.26).
Lift the rear battery out using the lifting straps provided
•
(Fig. 12.27).
Peel back 1 cover and using 2 x 13.0mm spanners,
•
undo & remove the terminal bolt. Repeat for the other
terminal/battery (Fig. 12.28).
On refitting, the
•
battery terminals must be covered
after connection with the caps provided on the cable
(Fig. 12.29).
Fig. 12.23
Fig. 12.24
Fig. 12.25
Fig. 12.26
Fig. 12.27
Fig. 12.28
Fig. 12.29
