Zippie Salsa M Скачать руководство пользователя страница 37

Страница: 37 / 72

ZIPPIE SALSA & SALSA

CAUTION!

Once the back is fully reclined/forward, or the lift is fully

raised/lowered, or the seat is fully tilted backwards/

forwards, do not continue to hold the joystick in its operating

position as this could damage the actuator.

R-net Control

Please refer to your R-net Owner’s Manual for

details.

qUICKIE DIRECT ACTUATOR CONTROL BOx

(Fig. 6.33)

To operate the backrest, seat lift, seat tilt:

• Push the relevant toggle switch into the forward

position.

• Release the toggle switch when the desired backrest

angle, seat lift height or seat tilt angle is reached.

CAUTION!

Once the back is fully reclined/forward, or the lift is fully

raised/lowered, or the seat is fully tilted backwards/

forwards, do not continue to hold the switch in its operating

position as this could damage the actuator.

R-net Control

Please refer to your R-net Owner’s Manual for

details.

Fig. 6.33

Fig. 6.32

• Operate the joystick in the forward or rearward direction

to move the recline up or down.

• Release the Joystick when the desired angle is

reached.

• To return to drive mode, press the actuator button

again.

Содержание Salsa M









































































Результаты поиска

Содержание Salsa M

Отзывы:

Бренды по названию

Популярные бренды

Zippie Salsa M, Инструкция по применению

Результаты поиска

Содержание Salsa M

Отзывы:

Бренды по названию

Популярные бренды