ZIPPIE SALSA & SALSA
31
Zippie Salsa Mid-Wheel Drive only:
Undo the 2 hand-wheels at the front, pull the release pin &
•
tilt the seat back.
Remove the 2 socket studs from the back seat posts.
•
Lift/lower the seat to the required position.
•
Align the holes then refit & tighten the socket studs.
•
Remove the 2 socket studs from the front seat posts.
•
Lift/lower the posts to match the required position.
•
Align the holes then refit & tighten the socket studs.
•
Close the seat, refit & tighten the hand wheels (Fig. 6.6).
•
6.7 Seat width adjustment
1. Remove the 5mm width adjustment bolts (A) and the
4mm towel bar adjustment bolt (B) (Fig. 6.7).
2. Move the left side seat rail, armrest and backrest
assembly to the desired position. See seat width position
settings (C) (Fig. 6.8).
Fig. 6.4
Fig. 6.5
Fig. 6.6
Fig. 6.8
Fig. 6.7
