18
•
Take care of the feather key 28 in the
shaft 27 which conveys the movement
(Fig. M).
•
The included tool 33 is on the tool hook
32 on the back side of the machine (Fig.
N).
2.7.2
Maintenance plan
Controls for the maintenance of the machine
Loose or lost
screws, nuts, bolts
Regularly prior to
each operation
Loose safety bolt
Regularly after and
prior to each opera-
tion
Damage of any part
of the machine
Regularly prior to
each operation
Machine cleaning
Regularly after op-
eration
2.7.3
Cleaning
Clean the machine from chips, dust, etc.
Clean the machine housing with a wet cloth
and a mild cleaning solution.
Put on all coatless flats and moving parts a
thin coat of oil.
I M P O R T A N T
The usage of solvents, aggressive
chemicals or scouring agents
damages the machine housing.
2.7.4
Transport
For transporting the safety hook 11 must be
locked (Fig. B). For operating you have to re-
move the screw 14. Unlock the hook and
move the feed carriage backwards. Then turn
the safety hook till the hole a agrees with the
hole in the leg and fit the screw again (Fig. C).
When the holes don’t agree exactly, you have
to equalize this with the other screw.
For the transport you have to put your hands
onto the handle and pull back carefully till the
machine stands on its wheels (Fig. O). Now
the machine can be transported.
2.7.5
Storage
•
Clean your machine.
•
Cover the log saw and store it at a dry
and clean place.
2.7.6
Disposal
Do not dispose your ZI-WP700J
in the residual waste! Contact
your local authorities for infor-
mation about best available
disposal possibilities in your
area. Disaggregate the machine
into its components before dis-
posing them.
2.8
Spare part order
With original ZIPPER spare parts you use parts
that are attuned to each other and shorten the
installation time and elongate your machines li-
fespan.
H I N W E I S
The installation of non-original parts renders
warranty null and void.
You find the order address in the preface of this
operation manual.
Содержание ZI-WP700J
