SAFETY
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
Seite 25
TISCHKREISSÄGE / TABLE SAW ZI-TKS 250H / ZI-TKS 250-2VB
ite 25
12
SAFETY
12.1
Intended Use
The ZIPPER table saw ZI-TKS250H or ZI-TKS250-2VB shall only be used for cutting wood without nails
and other foreign bodies.
ZIPPER MASCHINEN cannot be held responsible for any injuries or damages if there was performed
manipulation or adjustments to the machine.
12.2
Security instructions
Do not operate the machine at insufficient lighting conditions.
Do not operate the machine when you are tired, when your concentration is
impaired, and/ or under the influence of drugs, medication or alcohol.
Always be focused when working, take care to maintain a safe posture at every time.
Do not use the machine on a slope steeper than 10°.
Do not work on slippery ground.
The operation of the machine on icy or snowy ground is forbidden!
Slipping/ stumbling/ falling down are a frequent cause of severe injuries.
The machine shall be used only by trained persons.
Non authorized persons, especially children, shall be kept away from the work area.
Do not wear loose clothing, long hair openly or loose jewellery like necklaces etc.
when operating the machine
They might be catched by rotating parts and cause serious injuries.
Before any maintenance you have to disconnect the log saw from the power source.
Never use the plugged cable for transporting or manipulating the machine.
The running machine must always be looked after!
Before leaving the working area you have to turn off the machine and wait till the
motor and the saw blade are standing still.
Autogoods “130”
130.com.ua
