Zipper Mowers ZI-TKS 250H, Руководство по эксплуатации

Страница: 29 / 46

OPERATION
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at  Seite 28
TISCHKREISSÄGE / TABLE SAW ZI-TKS 250H / ZI-TKS 250-2VB ite 28
14 OPERATION
14.1 Operation instructions
W A R N I N G
Perform all machine settings with the machine being
disconnected from the power supply!
Make sure that after setting all tools, etc. were removed
from the machine and that all screws, levers, etc. are
tightened!
A T T E N T I O N
 Never switch the machine on while pressing the blade against the
material!
 Start cutting only when the saw blade has reached the appropriate
speed!
 Keep an eye on vibrations, unusual noises and movements. Stop
operation when abnormalities immediately!
 Never remove debris and other parts of the workpiece during saw
blade is running
14.1.1 Rip fence (Abb.13)
• Loosen the clamping screw.
• Insert the stopper mount on the lead.
• . Insert the rip fence at the grooves on the guide rail
• In addition, you can overthrow the rip fence to 90 ° and 2 in the Groove stuck on the
guide rail, depending on the thickness of the workpiece.
• You can move the entire structure along the guide 1.
14.1.2 Blade
W A R N I N G

Use only blades allowable for this machine!

Never use a damaged blade!

Use the machine never with defective or without mounted guard
HIGHEST RISK OF INJURY!
Blade dimension:
Max. Ø 250mm
Hole Ø 30mm
Max. Thickness 2,8mm
For 4700 min
-1 and more
Autogoods “130”
130.com.ua