ASSEMBLY
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Seite28
ZI-RMM94H
13.6
Operating test
Check the function of the pedals as well as the compressed air supply. In case of malfunction the
respective connections shall be checked again!
14
OPERATING
A T T E N T I O N
To avoid damage, use the supplied tire lever for mounting, or dismounting tires.
The area between the tire and rim, in which rests the bead breaker should always be coated for
ease of disassembly and protect the rim with lubricant or soapy water.
Take care when mounting the tire on any given course directions on the tire sidewall.
Tire and rim must fit the dimensions forth to each other.
Check the tire always for damage (deformation, surface damage, extreme wear and tear) be-
fore removing the tire.
Always bear in mind any special assembly / disassembly instructions from the tire manufactur-
er.
If you inflate the tire, make sure that the pressure rise is normal and pay attention to the tire
bead.
